Fingerprints

Fingerprint mani 

- with tutorial!

Black and white ruffian fingerprint manicure. Scroll down for a step by step!

I used Deborah Lippmann Fade to black, as it is pigmented enough to only need 1 coat. Don't worry about small imperfections in this step - most of the plate will be covered up.

Foundf like fomething they would drink in The Big Lebowfki, right? I used 2 coats of OPI Alpine Snow.

Let dry completely before the next step. Use a quick dry top coat if you wish.

Paint some black on tape (or anything that doesn't absorb the polish: ziplock bag, porcelain plate...)

   

The swirling is to ensure that you get the polish into all the nooks and crannies of your fingerprint.

You might want to practice this a few times on paper. The "just right" one is what you want on your nail.

This picture was hard to take. You basically want to press and roll your stamping finger over the nail, like you would a Konad stamp.

Don't forget to clean up the stamping finger as well!

Some additional things: you can of course stamp with any finger you'd like, or one for each corresponding nail. I choose (after experimenting) my index finger, as I have slightly better control comparing to other fingers. The thumb will, naturally, give some better coverage, but I find that you end up working in some difficult angles. The ruffian will take care of the coverage problem, anyway.

Having troubles with the ruffian? There's load of good tutorials on youtube covering that, so I won't go into detail. The gist of it is to paint your nails as usual, but leaving a small gap all around. Practise makes perfect, and this design is very forgiving. 

Products used:

Deborah Lippmann Fade to Black

OPI Alpine Snow

Abstract + Caviar

Abstract greyscale with caviar beads

The last couple of weeks, my computer has been breaking down every time I'm trying to update this blog. It's been a shitty computer from the beginning, Minecraft has never run properly, for example. That's ok. You need a monster computer for that anyways. But, a year ago, I was not able to play Minecraft at all anymore. I was ok with that, and moved back to playing Heroes of Might and Magic III, possibly the greatest game ever made. Then, all of a sudden, I could not even play that. It's from 1998, darn it. It should be ok, I would think. But no. Oh, well. And now, here I am, hoping that I will be able to get through a blog post before my poor computer cracks under the pressure.

Here's hoping, because I've got a neat caviar manicure to show you:

This is a really quick and simple thing to do. Black background, freehand random white stripes, smudge them with your finger, fill in some grey, black and white after a fashion. Add blobs of caviar beads. Done!

Products used:
Deborah Lippmann Fade to Black
OPI Alpine Snow
(Grey is a mix of the two above)
Ciaté Headturner Caviar Beads
Deborah Lippmann Addicted to Speed Topcoat

UPDATE:

As requested, here's a step by step tutorial.

Please excuse the badly focused pictures - you need to be a bit quick for this to work,

and taking pictures between the steps is neither recommended for the quality of the pictures nor for the quality of the manicure...   

Robson et al., 2012

Sophy Robson for Houses of Holland

Sophy Robson, the queen of nails and monarch of manicures, have a silly amount of impressive nail designs on her conscience. One of the many manis are my all time favourite multi-coloured design she did for Daphne Guinness, which you by all means should check out here.

Anyhow, earlier this fall miss Robson made an intriguing neon tie-dye design for Houses of Holland. And to continue with the good news, she released a video tutorial for it! You can see it here.

So, for this mani, I tried following her tutorial. After a few hours with that mani, I could resist to add some glitter in the form of dots and an accent nail.

Products used:
China Glaze Pool Party

Nails Inc Chelsea Embankment

Nails Inc Chelsea Square

Nubar Hot Yellow 
Depend #035

Dior Blue Denim
China Glaze For Audrey

Abstract (III)

Two quick tutorials

Inspiration: tutorial requested by reddit user FreeBird69

Again, this is a spin-off of the mani shown below. Tutorial for the ring finger design can be found here. This post will show how to do the middle and pinkie designs.  

Original blogpost

  

Middle finger: Lollipop dots

Start with your base colour. I choose a neon (China Glaze Pool Party), so I painted my nails white first to make the colour pop. Sidenote: as you can see, I'm not ready to part from my ring finger blob design just yet.

Slap some french tips on. I used China Glaze Liquid Leather. There's tons of tricks for making french tips (including but not restricted to taping with hole reinforcements or tape cut to fit, or even stamping). However, I recommend freehand. It's easy enough and practice makes perfect!

Then, I randomly applied some white dots. I used the big end of a regular pin needle and China Glaze White on White which is nicely opaque.

Then use the other end of a pin needle to make tiny black dots in the centre of the white ones. I'm holding my home made dotting tool, but a regular needle of course works just as well.

Use a striper polish or brush to make small tails on the white dots as pictured. I used Depend Art Liner in white. If you like, you can wait until after this step to do the french tips, but as they are more prone and unforgiving to fuckups than the dotting and striping, I prefer it in this order.

Pinkie: geometric design

Start with a white base. I have two coats of ChG White on White.

When the white is completely dry, put a piece of tape vertically down the middle.

Paint black (I have ChG Liquid Leather) and remove the tape. Some like to wait until the polish is a bit dry, some do it at once. I've never had trouble either way so I don't have a preference.

You will end up with a nice geometric design like this (if not, you can easily use stripers to fix it, or hide it in the next step). Let's risk messing this design up in the next step!

I totally gif:ed this for you. If you're using the white striper, start in the white, close to the black, and drag over into the black - and vice versa for the black striper. That way you get nice pinch outs of the lines.

Here's the result.

And Bam!, that's it.

Just to conclude this weekend of 7 manis: in the end I went back to that blobalicious ring finger as the accent:

How McQueenish of me.

Products used:

China Glaze Pool Party

China Glaze Liquid Leather

China Glaze White on White

Depend Art Liner in black and White
China Glaze Pelican Grey
Isadora Wonder Nail 651: Silver Sparkles
Isadora Wonder Nail 65: Smoky Grey

Abstract (II)

Radiating gloopiness

Inspiration: I found this video helpful for the technique

I really liked the ring finger design of my last mani, so I scrapped the others and tried it out as an accent nail:  

I love this mani! The silver (Isadora 651) is gorgeous but hard to show off in pictures.

Quite a few of my fellow redditlaqueristas also had this design as their favorite, so by popular demand and withouth further ado, here's a quick tutorial:  
  

Here's my set up. The needle is a regular pin needle in home made fimo clay casing, but you can use a tooth pick or any other dotting tool. If you want, you can tape your finger beforehand for easy clean up.

Put blobs of polish as pictured. I messed up one of my blobs, but it couldn't matter less for this design.

Wait until your polish blob is a gloopy, stringy mess. I only have two hands, so I had to take this picture on the side.

Now go from blob number one via blob number two and out to the sides and back again. Pick up a gloopy string every time you cross one of your blobs, and continue until you like the design.

Add another blob of polish and a  rhinestone to your focal point. Here, I experimented a bit more with the pinkie and it came out quite arachnoid. My favourite is still the ring finger as the highly contrasting colours show off even the thinnest lines.

A few additional things:

1. Be careful with the clean up process, as the lines can hang freely in the air between the highest point of your nail and cuticle or skin on the side. Make sure they are attached to the nail if you don't want to risk shifting your whole design. You can easily do that by pressing them very gently down, or "cut" them of with acetone to make them fall down.
2. I used an art liner because it is very gloopy in itself, but any polish works if you wait the right amount of time. Experiment!
3. This video (same as linked under inspiration, but I don't want you to miss it!) is helpful.

Products used:

Isadora Wonder Nail 651: Silver Sparkles

China Glaze White on White

Depend Art Liner in black

Leather

Studded leather nails

Inspiration: This post by girlinboots + studded leather

A week ago reddit user girlinboots asked r/redditlaqueristas for inspiration for a heavy metal-esque look. My idea for her was a leather-like texture with silver dots in a halo:

When my nails are already painted, my spoons gets what they deserve

So, today I thought I'd try it out on my nails instead, because even if that was a tiny spoon, it's still three times the size of a nail, and might or might not translate well to a manicure. Here's the result:

And here's a quick tutorial I threw together. Sorry that it's a bit small - this blog is not cooperating with me for the moment.

There's nothing complicated going on there, just a few simple steps:

1. You'll need a toothpick or other dotting tool, and three polishes:

• Black polish (I used China Glaze Liquid Leather - how fitting!)
• Black shatter (I used Isadora Black Tag)
• Silver [glitter] polish (I used H&M Silver Glitter)

2. Start out with a full coat of black polish. It should not be a matte.

3. Add a coat of black shatter. This dries a matte, which together with the shiny black underneath gives an interesting texture and leather-like reflections.

4. Add silver dots around the nail, using a toothpick or other dotting tool.

And that's it! If you use a topcoat, the leather-like structure becomes less pronounced as the shatter and base colour will have the same shine, be it matte or glossy.

My only regret is my choice of silver polish - it floated out into big blobby dots while drying. A denser silver with somewhat larger glitter would probably look a bit better. Oh, well.

Tarnished Copper

Verdigris nails

Inspiration: Tonickal at redditlaqueristas + CND tarnished metal nails + old copper pipes

Verdigris is the patina formed when copper, brass or bronze is exposed to air or water. Verdigris, meaning "green of Greece", has been used as a painters pigment since the classical era. Today, it's seldom used due to its toxicity and fickle colour; a vibrant green-cyan which tends to degrade into brown to dark green over the years. Luckily, when faking the effect with nail polish the colours will hold up!

Tarnished copper, or verdigris, nails

8 steps for a verdigris look, with bonus chemistry lesson

I used a spoon instead of nails in the tutorial, as my nails were already painted.

1. I used three shades in the turquoise-cyan range, and two copper-bronze. If you only have one of each, that is fine too. The polishes depicted here is, from left to right:

• Isadora Bel-Air Blue
• Isadora Marzipan
• China Glaze For Audrey
• Nails Inc Old Park Lane
• OPI Brisbane Bronze
• Chanel Mat Top Coat

You will also need a sponge. I use a small piece of a kitchen sponge. It's cheaper than make-up sponges, and I like the somewhat more porous texture created.

2. Start out with a full coat of a copper shade. I used Nails Inc Old Park Lane, which is a nice one-coater. You don't have to be neat - any little mistake is easily hidden later. Let it dry.

3. Sponge a dark turquoise a bit more than halfway down your nail. Make the line a bit uneven or undulating. If you only have one cyan/turqouise shade, mix it up with some darker blue or green to make a darker shade. Let it dry completely before sponging again, as it otherwise is easy to sponge away chunks of underlying polish!

4. Sponge your lighter shade almost down to the line of the darker one. I used the almost-Tiffany-blue For Audrey from China Glaze. Don't be afraid to build up a sponged texture - real verdigris builds up and are scraped of copper plates! If you use one cyan shade, this is when you use it unmixed. Let dry.

5. Sponge light green on randomly, close to the edge and possibly a few light sponges right on top of your copper. I used a lighter pastel pistachio/marzipan colour. For all these steps, I use the same corner of the sponge as a bit of mixing between the colours just adds to the effect. Let dry.

6. Sponge some medium turquoise on the green. Sponge it on to your liking, and add some randomly on top of the copper.

7. Now add matte top coat on top of the verdigris shades. Add it only on the cyan shades and be careful not to accidentally matte the copper. This step is what really lifts the design in my opinion. Let dry.

8. Now sponge some copper or bronze randomly on both the verdigris and the copper. Be careful to not have too much polish on the sponge. I like to use the dried up corner from the other sponging steps, as it gives an interesting spotted appearance. I used my bronze shade for this step, as the two shimmery shades makes it more interesting - but using the same copper as in step 2 is of course fine. Remember not to use top coat as you have a partly matte, partly shiny mani!